How to Unclog your Toilet with Sewer Repair Services

If you find that your toilet is clogged, do not panic. You can unclog your toilet with sewer repair services. There are many different ways to unclog a toilet, depending on the severity of the problem.

A professional plumber can help you if your toilet is clogged because they have experience in clearing drains and fixing pipes. If there is no sewage backup but only a few objects down the drain, it’s clear enough for any homeowner to remove them. A plunger may work well for you if this is the case.

To unclog a toilet with sewer repair services, call or email sewer repair services Van Nuys, CA to arrange an appointment!

Toilet Plunger

A plunger is one of the easiest ways to unclog a toilet with sewer repair services if it’s only clogged with some objects.

Step 1: Bring water to a boil in your kettle or teapot.

Step 2: Fill up the sink with several inches of hot water, then place the plunger in the sink.

Step 3: Place the plunger over the drain, and press the rubber part down to create a tight seal.

Step 4: Plunge up and down 10-15 times, then pull back on the handle quickly so that there is a powerful suction created to pull out all pieces of debris.

Step 5: Repeat the plunger method if necessary.

Cleaning the Pipes with Handheld Device

If you need to unclog your toilet with sewer repair services when there is little in the drain, use a small, hand-held cleaning device found at most hardware stores.

Step 1: Using the cleaning tool, flush the drain until the water is clear.

Step 2: If you still see debris, repeat the flushing process with each cleaning tool until the water runs clear.

Step 3: Repeat the plunger method if necessary.

Step 4: Call a professional plumber in your area or read below for more information about an alternative way to unclog a clogged toilet with sewer services.

Toilet Auger

An auger is a tool that can easily unclog your toilet by inserting it down the drain and removing any objects stuck inside.

Step 1: Find an auger at most hardware stores, then insert the wire portion of the tool into your toilet bowl.

Step 2: Feed auger through the pipe until you begin to see objects that need removal. If necessary, remove the objects with your hands.

Step 3: Flush the toilet several times to check if it is unclogged.

Step 4: If the water is still running slowly or you see some debris, repeat steps 1-3 until the water runs clear.