In most households, the water heater will need to be the right one suited on the type of house and number of family members. Electric water heaters use either 120- or 240-volt power to stimulate the metal heating elements coming out of the water heater tank on the side of the wall. Heating elements are found in the top of the tank and at the bottom. Electricity heats the metal loops in the aspects that heat the surrounding water. The size of the water heater and recovery time will depend on the wattage of these heating elements, which varies from one water heater to the next. Usually, when the machine is a brand, the expectant life will last depend on its use. There are common issues that may arise if the water heater is not well maintained.

What Happens to the Machine if Not Maintained?

Sediment

A layer of sediment from water can form in the bottom half of the tank.  It can cover the lower heating element. This sediment can reduce the efficiency of the water heater, as it effectively protects the lower heating element and prevents it from transferring its heat to the water. At this stage, it may be time to replace the water heater. Regular tank flushing can prevent sediment from stabilizing in the first place, but it might be useless once the lower heating element covers it. It could be the best option to call a water heater repair Phoenix, AZ to replace and install the machine.

Heating Elements

The most obvious symptom of this problem is if you suddenly notice that the usual hot water coming out of the taps has just become warm; if it occurs, the top heating element will likely break down. A slightly different symptom becomes visible: the water coming from the tap begins to feel quite hot but turns cold right away. Anyways, you can replace a heating element yourself for it’s a simple job.

Thermostat

The thermostat is typically mounted on the front of the heater that let you adjust the temperature of the water delivered to the faucets. In electric water heaters, it is on the bottom on the access panel on the side of the heater, or front. To solve a hot water problem is as simple as setting the temperature. Also, check the thermostat reset button – the red button located at the top of the thermostat. Sometimes just resetting it under will cause the heater to work again. A thermostat problem is relatively uncommon- more likely a burning heating element is causing problems.

Simple Task in Making it Work

Like any electrical project, always turn off the power in the circuit before you start working on a water heater, and follow all other rules for electrical safety. Ensure to match the voltage and wattage rating listed with the nameplate rating of the element when replacing heating elements. Do not replace a 120-volt part with a 240-volt piece, for example. If you are not certain what the wattage is, take the old heating element to the depot and ask them for a suitable replacement. If you need to replace either the thermostat or heating elements, draw a diagram of how the wires connect as you remove the old ones and put a label not to forget it. Detach the power and drain the water from the tank before removing the heating elements.